Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
Topic closed
#1 2019-01-23 07:20:23
- raveedc
- Contributor
- Registered: 2019-01-23
- Posts: 6
hi im johnny
i just received a proxmark 3 rdv4 and have installed homebrew on my MAC OS
i have also installed XCODE & MAC PORTS.
proxmark3> hw status
Sending bytes to proxmark failed - offline
Status command failed. USB Speed Test timed out
When i try any of the HW commands i get the message that my proxmark failed and is offline...
its literally connected to my mac with the usb...
i disconnected it many times and have tried the testing procedure on the getting started github page and every time i try to run the testing commands i get that my proxmark is offline and failing....
i have no idea what this means im sorry im new to this.
Please help
Offline
#2 2019-01-23 10:15:27
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: hi im johnny
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Your access rights has been updated.
Offline
Pages: 1
Topic closed