Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2019-01-17 20:24:54

asmwildcat
Contributor
Registered: 2019-01-17
Posts: 3

Jakcom R3 Ring Programming to HID Proximity Card

I bought a Jakcom R3 Ring online recently for my new office

I also bought a ACS NFC Reader from what I got from Jakcom site I would need to program ring.

I am trying to figure out how to program the information from my HID Proximity Card to my Jakcom R3 Ring so I don't have to use the card to open HID controlled doors.

Any help would be greatly appreciated. 

Adam

Offline

#2 2019-01-17 20:43:33

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Jakcom R3 Ring Programming to HID Proximity Card

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

Your access rights has been updated.

Offline

Board footer

Powered by FluxBB