Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
- Index
- » Introductions
- » Hello
Pages: 1
Topic closed
#1 2018-12-03 08:03:21
- KinnyAdelaide
- Contributor
- From: Adelaide, South Australia
- Registered: 2018-12-03
- Posts: 13
Hello
Hi all,
My name is Kin, I have been really interested with NFC engineering.
I have a PM3 RDV2 and a ACR122U, I also have a Windows and Kali box which my card readers can be used with.
I had managed to clone MF1K and Ultralight cards. I am now interested in looking at cards in 125khz cards, looking at cards with better security mechanism, with encryption such as DES, AES.
Personally, I am not that much of a RFID guy as comapared to my networking and cybersecurity field but I do want to excel my learning with RFID.
Have a nice day all!
Kin
Offline
#2 2018-12-03 08:04:39
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,507
- Website
Re: Hello
Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.
Your access rights has been updated.
Offline
Pages: 1
Topic closed
- Index
- » Introductions
- » Hello