Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.

"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2010-07-22 11:39:01

Registered: 2010-07-21
Posts: 1

Mifare Desfire + SAM Module

Our ultimate goal is actually to Read/Write with Mifare Reader (1K Classic  and 4K Desfire), in a way that the corresponding Keys be exchanged with the Mifare Reader through SAM only.

Do you know any modules which support this feature? If yes, please give some address or contacts.

Consider that we have a Bus System as well as a Taxi System, both utilizing DesFire 4K cards. In order to protect the Keys, the Keys are not provided to the contractor, but managed by the Employer, the municipality for example. The contractor's application should be designed in a way to read the Keys through SAM, then conduct card authentication and Read/Write operations. 

Best Regards


#2 2015-02-13 11:58:51

Registered: 2015-02-13
Posts: 1

Re: Mifare Desfire + SAM Module

this is very nice and cool post thanks for this ............!!!!!!!!!!!!!!!!!



Board footer

Powered by FluxBB