Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-06-22 09:01:55

rchack2018
Contributor
Registered: 2018-02-24
Posts: 3

Problema con Proxmark3

Well I had a problem with my Proxmark3 I was doing the installation of the drivers all success then on the subject of flashing apparently made an error and the proxmark3 started emitting a noise parapends CHR and fixed STD as well as C and A. And it does not let me do nothing, please I need your technical help.

he is attacked
Atte
thank you

Excuse my English is for translator

Offline

#2 2018-07-04 13:58:56

jimmy9806
Contributor
Registered: 2018-07-01
Posts: 6

Re: Problema con Proxmark3

Try connect it to your computer while holding the button (do not loose) and flash the bootrom and the full-image. If not able, then you might need a JTAG to flash it. ¡Vamos!

Offline

Board footer

Powered by FluxBB