Proxmark developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2018-05-08 16:38:58

Oleg
Contributor
Registered: 2018-05-07
Posts: 2

Proxmark3 easy + script mifare_autopwn

Hello all. Proxmark3 easy. There is the following problem - when you run the script mifare_autopwn at its completion an error occurs reading .bin file or HTML and recorded files .eml differ. Firmware and trying different from the old 2.0.0 to the latest. Any help would be appreciated.

=======
uC: AT91SAM7S256 Rev C         
Embedded Processor: ARM7TDMI         
Nonvolatile Program Memory Size: 256K bytes. Used: 199648 bytes (76%). Free: 62496 bytes (24%).         
Second Nonvolatile Program Memory Size: None         
Internal SRAM Size: 64K bytes         
Architecture Identifier: AT91SAM7Sxx Series         
Nonvolatile Program Memory Type: Embedded Flash Memory         
proxmark3> hw version
[[[ Cached information ]]]
Prox/RFID mark3 RFID instrument         
bootrom: master/v3.0.1-368-g03cdcca-suspect 2018-05-05 10:56:44
os: master/v3.0.1-368-g03cdcca-suspect 2018-05-05 10:56:48
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2017/10/27 at 08:30:59

=======
|-----------------------------------------|         
|----- Dumping all blocks to file... -----|         
|-----------------------------------------|         
#db# READ BLOCK FINISHED         
Successfully read block  0 of sector  0.         
#db# READ BLOCK FINISHED         
Successfully read block  1 of sector  0.         
#db# READ BLOCK FINISHED         
Successfully read block  2 of sector  0.         
#db# READ BLOCK FINISHED         
Successfully read block  3 of sector  0.         
#db# READ BLOCK FINISHED         
Successfully read block  0 of sector  1.         
#db# READ BLOCK FINISHED         
Successfully read block  1 of sector  1.         
#db# READ BLOCK FINISHED         
Successfully read block  2 of sector  1.         
#db# READ BLOCK FINISHED         
Successfully read block  3 of sector  1.         
#db# READ BLOCK FINISHED         
Successfully read block  0 of sector  2.         
#db# READ BLOCK FINISHED         
Successfully read block  1 of sector  2.         
#db# READ BLOCK FINISHED         
Successfully read block  2 of sector  2.         
#db# READ BLOCK FINISHED         
Successfully read block  3 of sector  2.         
#db# Authentication failed. Error card response.         
#db# Auth error         
#db# READ BLOCK FINISHED         
#db# Authentication failed. Error card response.         
#db# Auth error         
#db# READ BLOCK FINISHED         
#db# Authentication failed. Error card response.         
#db# Auth error         
#db# READ BLOCK FINISHED         
Could not read block  0 of sector  3         
Wrote a HTML dump to the file 52732F13.html
Wrote an emulator-dump to the file 738258BE.eml

======
|-----------------------------------------|         
|----- Dumping all blocks to file... -----|         
|-----------------------------------------|         
#db# READ BLOCK FINISHED         
Successfully read block  0 of sector  0.         
#db# READ BLOCK FINISHED         
Successfully read block  1 of sector  0.         
#db# READ BLOCK FINISHED         
Successfully read block  2 of sector  0.         
#db# READ BLOCK FINISHED         
Successfully read block  3 of sector  0.         
#db# READ BLOCK FINISHED         
Successfully read block  0 of sector  1.         
#db# READ BLOCK FINISHED         
Successfully read block  1 of sector  1.         
#db# READ BLOCK FINISHED         
Successfully read block  2 of sector  1.         
#db# READ BLOCK FINISHED         
Successfully read block  3 of sector  1.         
#db# Authentication failed. Error card response.         
#db# Auth error         
#db# READ BLOCK FINISHED         
#db# Authentication failed. Error card response.         
#db# Auth error         
#db# READ BLOCK FINISHED         
#db# Authentication failed. Error card response.         
#db# Auth error         
#db# READ BLOCK FINISHED         
Could not read block  0 of sector  2         
ERROR:     Could not read file dumpdata.bin
ERROR:     Could not read file dumpdata.bin
ERROR:     Could not read file

Last edited by Oleg (2018-05-08 16:52:09)

Offline

Board footer

Powered by FluxBB