Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2018-01-06 15:35:02

hang
Contributor
Registered: 2018-01-06
Posts: 1

Hello from Switzerland

Hello everyone

I’m from Switzerland and new to this forum.
I have recently bought a Elechhouse Proxmark3 and I’m now working on building up some knowledge in the RFID field.

In my private live I have an electronic door lock at my house, which works with a Mifare DESFire. And at work I have elevators controlled by MIFARE Classic. So far I managed to program a NFC ring to work with both systems.

In the future I would like to have an implant in my body, so I could for example open my house door and also use it for the elevator at work.

Of course I have tons of questions, but I will do some reading first before I bother you guys ;-)

Looking forward to chatting with you.
*hang*

Offline

#2 2018-01-06 19:04:18

iceman
Administrator
Registered: 2013-04-25
Posts: 9,507
Website

Re: Hello from Switzerland

Welcome and I suggest you read http://www.proxmark.org/forum/viewtopic.php?id=1125 as an introduction.

Offline

Board footer

Powered by FluxBB