Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-11-25 20:59:57

jaudo
Contributor
Registered: 2017-07-22
Posts: 7

Cloning TNP3

Hi all,

Im trying to clone a SL tnp3 toy of my own onto a chinese magic card.

Im using the lua scripts. However, if I clone the files to the magic card, it recognises the type but then says there's an error with the tag. I used other variables from the list, but I have the same error, so I though I needed to change the magic card into a valid UID key. However, I cant cause I dont have those figures so I cant check a valid UID.

The thing is, my toy is a penguin from the last game. When I try to insert the type and subtype I find in the sector 1, and dump it to the magic card, the game reader says directly there's an error. However in the other cases atleast recognises the type...

Any idea?

When I read the tnp3 with a mifare android app, it just reads the first 5 sectors. If I copy them (5 sectors x 3 +1) the SL reader enters into a loop.

Offline

Board footer

Powered by FluxBB