Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2017-07-22 16:57:40
- actionbias
- Contributor
- Registered: 2017-07-22
- Posts: 26
Salto Key Fob MIFARE Classic 4k | Plus 4k SL1 - How to clone
Help folks! I did hf search on a Salto Key Fob with an objective of cloning/duplicating this one.
(1) What type of key tag would I write onto? Please link me.
(2) What is the command to do so?
(3) Is this enough information or do I need more?
Thanks!
I tried some digging but getting lost in it.
Note: I modified the UID to jibberish just for a place holder.
proxmark3> hf search
UID : 9* *f 46 9*
ATQA : 00 02
SAK : 18 [2]
TYPE : NXP MIFARE Classic 4k | Plus 4k SL1 proprietary non iso14443-4 card found, RATS not supported Answers to chinese magic backdoor commands: NO Valid ISO14443A Tag Found - Quiting SearchOffline
#2 2017-07-22 20:25:38
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: Salto Key Fob MIFARE Classic 4k | Plus 4k SL1 - How to clone
read the wiki
Offline
#3 2017-07-24 11:28:55
- Dot.Com
- Contributor
- From: Hong Kong
- Registered: 2016-10-05
- Posts: 180
- Website
Re: Salto Key Fob MIFARE Classic 4k | Plus 4k SL1 - How to clone
You need a proxmark3, 4k s70 UID Changeable and some read up.
http://www.rfxsecure.com/product/mifare … hangeable/
You got to test whether these cards will work for you.
Offline