Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2017-03-24 06:51:19

repreentative
Contributor
Registered: 2017-03-22
Posts: 19

Strange thing between Raspi and Win 10

The card I Cracked on Win 10, I got the  keyA and keyB like that


|---|----------------|---|----------------|---|         
|sec|key A           |res|key B           |res|         
|---|----------------|---|----------------|---|         
|000|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|001|  4c4452464a48  | 1 |  d97014793eca  | 1 |         
|002|  4c4452464a48  | 1 |  7dfb28bbfde3  | 1 |         
|003|  544c35373031  | 1 |  ffffffffffff  | 1 |         
|004|  4c4452464a48  | 1 |  d187c04f06e7  | 1 |         
|005|  221cbfc82141  | 1 |  bf98cdea6623  | 1 |         
|006|  439638fa3390  | 1 |  ffffffffffff  | 1 |         
|007|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|008|  a463e6591766  | 1 |  608087091837  | 1 |         
|009|  4c444f50454e  | 1 |  24a77b4ba9a2  | 1 |         
|010|  59d5085af988  | 1 |  ffffffffffff  | 1 |         
|011|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|012|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|013|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|014|  281683716a1f  | 1 |  281683716a1f  | 1 |         
|015|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         


The keyB is easy to get  smile

but on Raspi3 kali, I can not get the keyB...:D


|---|----------------|---|----------------|---|         
|sec|key A           |res|key B           |res|         
|---|----------------|---|----------------|---|         
|000|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|001|  4c4452464a48  | 1 |  000000000000  | 0 |         
|002|  4c4452464a48  | 1 |  000000000000  | 0 |         
|003|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|004|  4c4452464a48  | 1 |  000000000000  | 0 |         
|005|  221cbfc82141  | 1 |  000000000000  | 0 |         
|006|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|007|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|008|  a463e6591766  | 1 |  000000000000  | 0 |         
|009|  4c444f50454e  | 1 |  000000000000  | 0 |         
|010|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|011|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|012|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|013|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         
|014|  281683716a1f  | 1 |  281683716a1f  | 1 |         
|015|  ffffffffffff  | 1 |  ffffffffffff  | 1 |         



and I can not Upgrading Proxmark3 to CDC Bootloader and Upgrading Proxmark3 Firmware at kali.

one said WAITING FOR Proxmark to appear on USB .(I ALWAYS PRESS THE BUTTON)
the other is Sending bytes to proxmark faild.

@piwi @iceman

Last edited by repreentative (2017-03-24 07:11:18)

Offline

#2 2017-03-24 08:14:07

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: Strange thing between Raspi and Win 10

what kind of pm3 do you have?  If you bought it recently, the device already have the cdc-bootrom installed.  If you bought it before 2014 it didnt.

When you flash, do you use "client/flasher"  command?   if you do,  then you are using the CDC version.

You will need to be more specific about what your problems,  which commands did you use,  tracelogs,  which version of firmware are you using etc if you want us to help you.

Offline

#3 2017-03-24 08:49:25

repreentative
Contributor
Registered: 2017-03-22
Posts: 19

Re: Strange thing between Raspi and Win 10

The pm3 I bought it recently,seem like 125KHZ ...
I can copy card at win10 use the client.I wanna to know why I can not get the KeyB at kali.
The same card ,at win 10.I use the Proxmark3_EASY_GUI.exe.. It works well.keyB is obviously.
But at  Rsapi the order is 'proxmark3> hf mf nested 1 0 A ffffffffffff d', I  got the keyB is zero .
OH。。。some keyA IS also lose cant read.sorry,my description maybe  is not accurate.
but it is the same one card. at kali I can not get the block.
SO I dont think the problem on hardware.




iceman wrote:

what kind of pm3 do you have?  If you bought it recently, the device already have the cdc-bootrom installed.  If you bought it before 2014 it didnt.

When you flash, do you use "client/flasher"  command?   if you do,  then you are using the CDC version.

You will need to be more specific about what your problems,  which commands did you use,  tracelogs,  which version of firmware are you using etc if you want us to help you.

Last edited by repreentative (2017-03-24 08:57:18)

Offline

#4 2017-03-24 09:18:09

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: Strange thing between Raspi and Win 10

If you read the forum about "nested" command, you would have found out that it doesn't always find all keys.  You may need to run it several times.  And even then, there is no guarantee.  I suggest you take some time to understand the commands involved and what their limits and function is.

Offline

#5 2017-03-24 11:19:37

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: Strange thing between Raspi and Win 10

Proxmark3_Easy_GUI.exe on Win10 and your self compiled proxmark3 on RasPi/KaLi are probably a different version and would require to flash the corresponding firmware version. I understand that you have problems with flashing the firmware, therefore the version on RasPi probably doesn't fit.

What are the results with Kali Linux on your PC?

Offline

#6 2017-03-24 11:51:31

repreentative
Contributor
Registered: 2017-03-22
Posts: 19

Re: Strange thing between Raspi and Win 10

I try seven or eight tinmes? both on Raspi and kali linux vmware
they are both can not calculation all the key.
Missing part about 3 keyA and 6 keyB.



piwi wrote:

Proxmark3_Easy_GUI.exe on Win10 and your self compiled proxmark3 on RasPi/KaLi are probably a different version and would require to flash the corresponding firmware version. I understand that you have problems with flashing the firmware, therefore the version on RasPi probably doesn't fit.

What are the results with Kali Linux on your PC?

Last edited by repreentative (2017-03-24 11:54:25)

Offline

#7 2017-03-24 11:54:33

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: Strange thing between Raspi and Win 10

This confirms my assumption: your PM3 firmware and your self compiled client software don't match. You need to reflash your firmware or stick with Proxmark3_Easy_GUI.exe.

Offline

#8 2017-03-24 16:08:38

repreentative
Contributor
Registered: 2017-03-22
Posts: 19

Re: Strange thing between Raspi and Win 10

I also think the problem at the firmware.
but when I PRESS the button and at the /proxmark3/client
and run the order   ./flasher /dev/ttyACM0 ../armsrc/obj/fullimage.elf
The yellow and red light are bright. but something like

eat
help             This help. Use '<command> help' for details of a particular command.         
data             { Plot window / data buffer manipulation... }         
hf               { High Frequency commands... }         
hw               { Hardware commands... }         
lf               { Low Frequency commands... }         
reveng           Crc calculations from the software reveng1-30         
script           { Scripting commands }         
quit             Exit program         
exit             Exit program         


exit

(process:1264): GLib-CRITICAL **: g_main_context_pop_thread_default: assertion 'stack != NULL' failed
(very long   this is the end)


seems like can not upgrad Proxmark3 Firmware.
it is a bug? VERY SMALL... fell life are so hard




piwi wrote:

This confirms my assumption: your PM3 firmware and your self compiled client software don't match. You need to reflash your firmware or stick with Proxmark3_Easy_GUI.exe.

Last edited by repreentative (2017-03-24 16:10:19)

Offline

#9 2017-03-24 16:29:09

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: Strange thing between Raspi and Win 10

Are you trying to run the flash command from inside the proxmark client? (or inside proxmark easy gui?)  You can't do that.
you need to execute it from a command prompt.

Offline

#10 2017-03-24 16:58:41

repreentative
Contributor
Registered: 2017-03-22
Posts: 19

Re: Strange thing between Raspi and Win 10

haha,I am the green hand.a beginner.
but I know the different between root@kali:~/promark3/client#
                                            and                   proxmark3>
my order is   root@kali:~/promark3/client# ./flasher /dev/ttyACM0 ../armsrc/obj/fullimage.elf
and I can not  upgrad Proxmark3 Firmware on windows use cmd.exe...


iceman wrote:

Are you trying to run the flash command from inside the proxmark client? (or inside proxmark easy gui?)  You can't do that.
you need to execute it from a command prompt.

Offline

#11 2017-03-24 17:26:45

piwi
Contributor
Registered: 2013-06-04
Posts: 704

Re: Strange thing between Raspi and Win 10

Would you please run

 ./flasher /dev/ttyACM0 ../armsrc/obj/fullimage.elf

without pressing any button and paste the output here?

Offline

#12 2017-03-25 04:20:55

repreentative
Contributor
Registered: 2017-03-22
Posts: 19

Re: Strange thing between Raspi and Win 10

sorry,Because of the time difference,I went to sleep about 01:00
AT the kali2.0 linux slightly normal point
root@kali:~/proxmark3/client# ./flasher /dev/ttyACM0 ../armsrc/obj/fullimage.elfLoading ELF file '../armsrc/obj/fullimage.elf'...
Loading usable ELF segments:
0: V 0x00102000 P 0x00102000 (0x0002b610->0x0002b610) [R X] @0x94
1: V 0x00200000 P 0x0012d610 (0x0000196c->0x0000196c) [RW ] @0x2b6a4
Note: Extending previous segment from 0x2b610 to 0x2cf7c bytes

Waiting for Proxmark to appear on /dev/ttyACM0. Found.
Entering bootloader...
(Press and release the button only to abort)
Waiting for Proxmark to reappear on /dev/ttyACM0........ Found.
Sending bytes to proxmark failed

but at Raspi kali rolling ,It is strange, a very long paragraph about help command
help             This help. Use '<command> help' for details of a particular command.         
data             { Plot window / data buffer manipulation... }         
hf               { High Frequency commands... }         
hw               { Hardware commands... }         
lf               { Low Frequency commands... }         
reveng           Crc calculations from the software reveng1-30         
script           { Scripting commands }         
quit             Exit program         
exit             Exit program         

exit
(process:1264): GLib-CRITICAL **: g_main_context_pop_thread_default: assertion 'stack != NULL' failed
(very long   this is the end)


like the #8

piwi wrote:

Would you please run

 ./flasher /dev/ttyACM0 ../armsrc/obj/fullimage.elf

without pressing any button and paste the output here?

Offline

#13 2017-03-25 08:06:39

iceman
Administrator
Registered: 2013-04-25
Posts: 9,495
Website

Re: Strange thing between Raspi and Win 10

That looks like a real bug smile   I suggest starting an new issue on Github for the trackrecord.

The flasher executable doesn't not dump help-text like that.   When you create the issue,  try using pastebin.com for your traceoutputs.
It makes yr issues easier to read,  and easier to follow the traces aswell.

Offline

#14 2017-03-25 16:36:55

repreentative
Contributor
Registered: 2017-03-22
Posts: 19

Re: Strange thing between Raspi and Win 10

To be honest,I do not know what the pastebin.com is... and some thing I should paste on it.
now is 23:00 I try last time today...
first , I upgrade the firmware on win10 use the .bat to make the firmware reset,seems like it is successful.
and then ,I use the order dmesg|grep -i usb ,and I could see the ACM is 1.  maybe my description is not good
so I try to update firmware use the order  ./flasher / dev / ttyACM1 ../armsrc/obj/fullimage.elf

Not surprisingly,It coule be FOUND ,but Sendind bytes to proxmark faild. 
I gie up today.fight tomorrow
thank you iceman and piwi.
goog night for myself....


iceman wrote:

That looks like a real bug smile   I suggest starting an new issue on Github for the trackrecord.

The flasher executable doesn't not dump help-text like that.   When you create the issue,  try using pastebin.com for your traceoutputs.
It makes yr issues easier to read,  and easier to follow the traces aswell.

Offline

Board footer

Powered by FluxBB