Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.

"Learn the tools of the trade the hard way." +Fravia

You are not logged in.


Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2016-11-03 18:36:05

Registered: 2016-11-03
Posts: 13

Guide for compiling on SUSE Linux Enterprise Desktop 11 SP3 64-bit US


I have SUSE Linux Enterprise Desktop 11 SP3 64-bit US Factory Preload from HP running in my HP ZBook 17 G1 and can't upgrade since it is afterwards no longer supported by HP :-(

I bought a Proxmark3 that is running fine on MS Windows XP but that I would now like to move to my HP Laptop.

The Proxmark3 is being recognized by SLED 11 SP3 when I plug it to the HP ZBook and seen as ttyACM0 USB ACM device but the Proxmark3 client software for Ubuntu Linux does not work on my SLED 11 SP3 due to older C libraries I have on my system (e.g.: libreadline6 is required when I only have libreadline5, etc).

I would say from here that I need to get the Proxmark3 source code and compile it on my SLED 11 SP3 64-bit US system but really have no idea about what to download, from where and then how to generate the new Proxmark3 client software ...

Any help will be really very much appreciated.

Thanks a lot by now for your time.



Board footer

Powered by FluxBB