Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2016-10-17 23:17:14
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,501
- Website
HF - 13.56mHz clocks frequency etc
HF - 13.56mHz
A minor overview of field clock (FC) and its duration in the table below.
Carrier Freq is 13.56 mHz
SubCarrier Freq is 106, 212, 424, 847.5 kHz
sample
Duration of one peak is 1 / 847.5 = 1.18us------------------------------------------------------------
FC/16 | 1.18us | 1/847.5 kHz | 13.56mHz / 16 = 847.5 kHz |
FC/32 | 2.36us | 1/423.7 kHz | 13.56mHz / 32 = 424 kHz |
FC/64 | 4.72us | 1/211.8 kHz | 13.56mHz / 64 = 211.8 kHz |
FC/128 | 9.44us | 1/105.9 kHz | 13.56mHz / 128 = 105.9 kHz |
--------------------------------------------------------------
Should add number of peaks in a FC converts into set bits in the FPGA when using modes like etc etc.
FPGA_MAJOR_MODE_HF_SIMULATOR | FPGA_HF_SIMULATOR_MODULATE_212K
FPGA_MAJOR_MODE_HF_ISO14443A | FPGA_HF_ISO14443A_TAGSIM_LISTEN
Offline
#2 2016-10-17 23:43:25
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,501
- Website
Re: HF - 13.56mHz clocks frequency etc
Why is this interesting? If you want to fiddle with the ARM source code and write new UART/DEMOD, for other protocols than ISO14443a, ISO14443b then this is a must.
Legic Prime, TAG to Reader (PICC to PCD) has fc/64, 1 bitperiod duration is 100us.
To send a "1" bit: you'll need to send 100/4.72 = 21 bits of ones to FPGA. (or 21peaks) . 1111 1111 1111 1111 1111 1
To send a "0" bit: you'll need to send 100/4.72 = 21 bits of zeros to FPGA. 0000 0000 0000 0000 0000 0
0x15 = 010101b =
00000000000000000000 0111 1111 1111 1111 1111 1100 0000000000000000000111111111111111111111000000000000000000000111111111111111111111
->->(hex) 000007FFFFC000 With this you will understand threads like:
http://www.proxmark.org/forum/viewtopic.php?id=2004
Offline