Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2009-09-16 09:15:42

notserpe
Member
From: Montreal
Registered: 2009-09-15
Posts: 14
Website

USB cable for Antenna building

I thought I would share the fact that I had a hard time finding a USB cable in Canada (Montreal in particular) with the right Hirose connector, until that is, while I was bored and looking at clearance junk at my local The Source (formerly RadioShack), I've also seen them in RadioSnacks in Ontario.

I've also seen them on their website going for just under $7 as well as in store. That might save you the day of walking around the
city looking for a cheap cable to make an HF antenna for your spanking new pm3. Then again, they're clearance and won't be around long.

Offline

#2 2009-09-17 02:56:18

rleroy
Contributor
From: Between a REQB and a ATQB
Registered: 2009-03-04
Posts: 61

Re: USB cable for Antenna building

I'm happy to learn that there a other people who plays with the proxmark in Montreal:)

Offline

Board footer

Powered by FluxBB