Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2016-04-22 16:21:05

nmhrgk
Member
Registered: 2016-04-21
Posts: 4

Can anyone help identify what type of access card is this?

FluxBB bbcode test

Offline

#2 2016-04-22 16:22:08

nmhrgk
Member
Registered: 2016-04-21
Posts: 4

Re: Can anyone help identify what type of access card is this?

https://drive.google.com/open?id=0B0jxPtb20OOdSGtJeEpSaFJVVVE

Offline

#3 2016-04-22 16:35:20

nmhrgk
Member
Registered: 2016-04-21
Posts: 4

Re: Can anyone help identify what type of access card is this?

I'm not too sure what cards is this, but when I using ProxMark3 with LF antenna.

Tried with Indala Command:
LF read
Data Sample 4000
Lf indalademod (Manage to get the UID)
Lf indalaclone (cloning to a T55xx blank card)
Clone success.

But when check both card UID is the same.

When trying to use it, but it just does not be able to detect anything.

Please advise.

Offline

#4 2016-04-24 03:29:23

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: Can anyone help identify what type of access card is this?

Offline

#5 2016-04-24 14:14:58

nmhrgk
Member
Registered: 2016-04-21
Posts: 4

Re: Can anyone help identify what type of access card is this?

Ok. Thank you very much! I will go and read through it (:

Offline

#6 2016-04-29 15:46:00

mnelson
Contributor
From: Outside Denver, CO, USA
Registered: 2015-06-05
Posts: 33

Re: Can anyone help identify what type of access card is this?

My guess is that it's a SecuraKey RadioKey RKCM 01 card.  SecuraKey hot-stamps their numbers just like the one you have pictured.  I think it's an 01 card rather than an 02 since there is no Facility Code stamped in the lower left corner.  I've never had much luck with this one using my PM3.

Offline

Board footer

Powered by FluxBB