Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2015-10-23 09:25:54
- Gjgrant
- Member
- Registered: 2015-10-23
- Posts: 9
Trouble with Driver
Just got the pm3 and ran into trouble when I got to the driver step of the install. I'm using Windows 10, so I think this may be causing the issue? Either way I downloaded and extracted the "Proxmark-Driver-2012-01-15.7z" file and when I connected the pm3 and went to my devices I got the images below.
It appears to have installed some Windows driver, and I'm not given an option to change it. Any thoughts on how to correct this? Any help is greatly appreciated.
Thanks
Offline
#2 2015-10-23 09:33:42
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,506
- Website
Re: Trouble with Driver
Sorry, haven't installed a PM3 on Win10 yet.
Offline
#3 2015-10-23 13:29:35
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Trouble with Driver
Can the client connect to com3? The pm3 driver is not signed so you will need to boot to a special boot mode to install the nonsigned driver.
Offline
#4 2015-10-23 14:09:03
- AT91SAM
- Contributor
- Registered: 2015-10-21
- Posts: 73
Re: Trouble with Driver
Same problem here , I switched to Linux , that's better in many ways.
If your bound to windows10 you can install vmware this program is signed and allows to run Linux from inside.
avoiding the whole singing B*ll-sh*t
W10 is not useful anyway if you prefer privacy.
since everything running on it strait to Redmond.
Offline
#5 2015-10-23 16:14:33
- Gjgrant
- Member
- Registered: 2015-10-23
- Posts: 9
Re: Trouble with Driver
Thank for the advice. I'll give it a shot.
Offline
#6 2015-10-23 16:16:11
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Trouble with Driver
i have no problems with windows 10. (or linux for that matter...)
Offline
#7 2015-10-23 17:04:49
- Gjgrant
- Member
- Registered: 2015-10-23
- Posts: 9
Re: Trouble with Driver
So I went ahead and i tired to install it on my computer running Windows 7 and ran into an issue at the same spot. When I initially plug in the pm3 I get the message below.
Then I went to locate the pm3 on the device manager, and it wasn't under HID's, but I did find an unknown device under other devices which did not have a driver installed.
When I went to select the "ProxMark-3_RFID_Instrument" driver I was only able to select a folder, and not an actual file. So I selected the "proxmark_driver" folder and got the message below.
Am I just missing something simple here?
Thanks
Offline
#8 2015-10-23 17:19:38
- Pummarola
- Contributor
- Registered: 2015-10-19
- Posts: 36
Re: Trouble with Driver
Have you disabled driver signature verification? There is a similar problem affecting Windows 8.1.
Offline
#9 2015-10-23 17:27:56
- Gjgrant
- Member
- Registered: 2015-10-23
- Posts: 9
Re: Trouble with Driver
I did when I tried on Windows 10, but not on Windows 7 as I did not think it was necessary on 7 and it did try an install a driver, unlike before I disabled it on 10.
Offline
#10 2015-10-23 17:40:56
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Trouble with Driver
If you have run windows updates on windows 7 they've added the driver signing requirements... Reboot and hit f8 and select to disable driver signatures. This is the only current successful option on all up to date windows systems from win 7 up...
Offline
#11 2015-10-23 19:00:20
- Gjgrant
- Member
- Registered: 2015-10-23
- Posts: 9
Re: Trouble with Driver
I turned off the driver signature requirements, and still have the same result....
Offline
#12 2015-10-23 19:02:53
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Trouble with Driver
Does the pm3 have the correct bootrom or a very very old bootrom?
Have you tried different USB ports? Are you sure you have the correct driver?
Offline
#13 2015-10-23 19:04:06
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Trouble with Driver
Also you tried specifying that you had a disk for the driver instead of searching for it?
Last edited by marshmellow (2015-10-23 19:04:44)
Offline
#14 2015-10-23 19:24:09
- Gjgrant
- Member
- Registered: 2015-10-23
- Posts: 9
Re: Trouble with Driver
Sorry for my inexperience here, but how can I tell which bootroom I have?
Also, I did try multiple USB ports and this is the driver I'm trying to use. Do not have a disk.
Offline
#15 2015-10-23 19:35:13
- marshmellow
- Contributor
- From: US
- Registered: 2013-06-10
- Posts: 2,302
Re: Trouble with Driver
don't allow windows to search- say you have a disk then browse to the file...
Offline
#16 2015-10-23 19:45:11
- Gjgrant
- Member
- Registered: 2015-10-23
- Posts: 9
Re: Trouble with Driver
I tried the driver from the .rar file and it seems to have worked. Hopefully the rest goes fairly smoothly. Appreciate all of the help!
Offline