Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2015-10-20 18:17:13

gibby13
Member
Registered: 2015-10-20
Posts: 3

Ubuntu 14.04 issue

So I had my proxmark3 working on my laptop and my desktop, both running Ubuntu 14.04 LTS 64bit. I did an apt-get upgrade and apt-get dist-upgrade on my desktop. Now for the life of me I can not get it to communicate on my desktop. Any ideas?

Offline

#2 2015-10-20 21:25:44

meter
Contributor
Registered: 2015-07-13
Posts: 77

Re: Ubuntu 14.04 issue

Without details no idea, but if you want you can post the output of command dmesg for understand what happens when you insert PM3 in usb port.
What does mean "I can not get it to communicate"? Is there the device /dev/ttyACM0? Have you some errors?
Sorry but when I bought PM3 "magic ball" is not included. smile

Offline

#3 2015-10-20 22:48:23

gibby13
Member
Registered: 2015-10-20
Posts: 3

Re: Ubuntu 14.04 issue

I do get a /dev/ttyACM0 but when I connect to it this is all i get

sudo ./proxmark3 /dev/ttyACM0
proxmark3> hw status
Status command failed. USB Speed Test timed out
proxmark3> hw ping
Ping failed
proxmark3>

Here is output from syslog when connecting the device:

Oct 20 16:59:48 desktop kernel: [23112.154380] usb 2-1.5: new full-speed USB device number 31 using ehci-pci
Oct 20 16:59:48 desktop kernel: [23112.923008] usb 2-1.5: new full-speed USB device number 32 using ehci-pci
Oct 20 16:59:53 desktop kernel: [23118.021403] usb 2-1.5: New USB device found, idVendor=2d2d, idProduct=504d
Oct 20 16:59:53 desktop kernel: [23118.021406] usb 2-1.5: New USB device strings: Mfr=1, Product=0, SerialNumber=0
Oct 20 16:59:53 desktop kernel: [23118.021408] usb 2-1.5: Manufacturer: proxmark.org
Oct 20 16:59:53 desktop kernel: [23118.021721] cdc_acm 2-1.5:1.0: This device cannot do calls on its own. It is not a modem.
Oct 20 16:59:53 desktop kernel: [23118.021742] cdc_acm 2-1.5:1.0: ttyACM0: USB ACM device
Oct 20 16:59:53 desktop mtp-probe: checking bus 2, device 32: "/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5"
Oct 20 16:59:53 desktop mtp-probe: bus: 2, device: 32 was not an MTP device

Offline

#4 2015-10-21 08:47:24

iceman
Administrator
Registered: 2013-04-25
Posts: 5,845
Website

Re: Ubuntu 14.04 issue

have you flashed bootrom & fullimage before you run the client?


If you feel the love,  https://www.patreon.com/iceman1001

modhex(hkhehghthbhudcfcdchkigiehgduiehg)

Offline

#5 2015-10-21 14:51:23

meter
Contributor
Registered: 2015-07-13
Posts: 77

Re: Ubuntu 14.04 issue

Maybe PM3 stay in bootloader mode, LED A(yellow) and C(red) are ON after you attach PM3 or go OFF?

Offline

#6 2015-10-21 15:17:39

gibby13
Member
Registered: 2015-10-20
Posts: 3

Re: Ubuntu 14.04 issue

Yes I flashed the bootrom and fullimage yesterday from my laptop. Everything works when using the laptop. Also I pulled the latest from github, verified arm gcc version and compiled. Still the same symptoms.

arm-none-eabi-gcc --version
arm-none-eabi-gcc (devkitARM release 41) 4.7.1
Copyright (C) 2012 Free Software Foundation, Inc.
This is free software; see the source for copying conditions.  There is NO
warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.

Offline

Board footer

Powered by FluxBB