Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2015-03-19 20:03:25

asper
Contributor
Registered: 2008-08-24
Posts: 1,409

Bug with " lf search u 1 "

The command seems to recognize parameter 1 or u only, together with 1 and u will not work.

lf search -> ok
lf search u -> ok
lf search 1 -> ok
lf search 1 u = doesn't work

Help file is the following:

Usage:  lf search <0|1> (u)         
     <use data from Graphbuffer> , if not set, try reading data from tag.         
     [Search for Unknown tags] , if not set, reads only known tags.         
    sample: lf search     = try reading data from tag & search for known tags         
          : lf search 1   = use data from GraphBuffer & search for known tags         
          : lf search u   = try reading data from tag & search for known and unknown tags         
          : lf search 1 u = use data from GraphBuffer & search for known and unknown tags

Offline

#2 2015-03-19 20:31:23

iceman
Administrator
Registered: 2013-04-25
Posts: 9,497
Website

Re: Bug with " lf search u 1 "

This is the len bug I mentioned before,  fix is on the way with Marshmellows next patch.

Offline

#3 2015-03-20 05:16:35

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: Bug with " lf search u 1 "

Yeah, sorry but I have some large ish items I want to thoroughly test before I can do another pull to fix this.  I am getting closer...  Just time is a challenge.

Offline

#4 2015-03-24 12:17:03

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: Bug with " lf search u 1 "

Fixed

Offline

Board footer

Powered by FluxBB