Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

Pages: 1

#1 2015-02-20 23:06:40

alexeybar200
Contributor
Registered: 2014-05-16
Posts: 17

update PM3 problem

When I try to update the version 0.0.2 to 0.0.7 (Bootrom.bat) I got a message about the successful completion of renovation . After that  pm3 has not determined in the device list windows. Red and Yellow LEDs on PM3 are continuously light  and periodically turns green and switches the relay. Can you help me?

Offline

#2 2015-02-21 19:47:22

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: update PM3 problem

Try holding the button down while flashing the FPGA.

Offline

#3 2015-02-21 23:05:47

alexeybar200
Contributor
Registered: 2014-05-16
Posts: 17

Re: update PM3 problem

Thank you!

Offline

#4 2015-02-22 05:16:20

marshmellow
Contributor
From: US
Registered: 2013-06-10
Posts: 2,302

Re: update PM3 problem

did that work for you?

Offline

Pages: 1

Board footer

Powered by FluxBB