Proxmark3 developers community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

#1 2014-02-12 23:29:56

Dimib1
Member
Registered: 2014-02-12
Posts: 2

Keri Systems RFID clone

Hello,

I have been researching the proxmark3 and other solutions for cloning RFID specifically for Keri Systems' PKT-10X. From what I understand, Keri Systems' RFID has a 125KHz excitation but returns at 62.5KHz. Can proxmark3 clone such a key with the prepackaged firmware?

Does anyone have experience working with these Keri System RFIDs? would you recommend investing in the proxmark3 or looking for another solution?

Any guidance is super appreciated. Thanks!

Offline

#2 2014-02-14 02:34:48

clonemykey
Member
Registered: 2013-06-24
Posts: 1

Re: Keri Systems RFID clone

Hi Dimib1,

We duplicate this key very often but since you have a pm3 you should be able to do it yourself! Try the following.

If your serial number has a "k" in it.

> lf read
>datasamples 2000
>lf indalademod
see result. You should get matching occurrences, usually 3 of 3.

Take that code and use a t5x77 chip and use following command.

> lf indalaclone CODE.

If your serial number has an "h" in it.

>lf hid fskdemod
get code
>lf hid clone CODE (use T5x77 chip)

Hope this helps!

Offline

#3 2014-02-14 19:00:20

Dimib1
Member
Registered: 2014-02-12
Posts: 2

Re: Keri Systems RFID clone

Thank you, I will try this out ASAP and let you all know what happens.

I really appreciate the info clonemykey!

Offline

Board footer

Powered by FluxBB