Proxmark3 community
Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Announcement
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
#1 2024-02-14 13:18:31
- TomNick100
- Contributor
- Registered: 2024-02-07
- Posts: 4
Sim014.bin upgrade problem
Hi everybody,
I started my proxmark and got a device mismatch:
/proxmark3$ ./pm3
[=] Session log /home/jesse/.proxmark3/logs/log_20240214120236.txt
[+] loaded `/home/jesse/.proxmark3/preferences.json`
[+] Using UART port /dev/ttyACM0
[+] Communicating with PM3 over USB-CDC
8888888b. 888b d888 .d8888b.
888 Y88b 8888b d8888 d88P Y88b
888 888 88888b.d88888 .d88P
888 d88P 888Y88888P888 8888"
8888888P" 888 Y888P 888 "Y8b.
888 888 Y8P 888 888 888
888 888 " 888 Y88b d88P
888 888 888 "Y8888P" [ ☕ ]
QSocketNotifier: Can only be used with threads started with QThread
[ Proxmark3 RFID instrument ]
MCU....... AT91SAM7S512 Rev A
Memory.... 512 KB ( 69% used )
Client.... Iceman/master/v4.17768-380-g6566021f3 2024-02-07 08:38:29
Bootrom... Iceman/master/v4.17768-380-g6566021f3-suspect 2024-02-07 08:38:20
OS........ Iceman/master/v4.17768-380-g6566021f3-suspect 2024-02-07 08:38:38
Target.... device / fw mismatchSo I tried to upgrade the sim014.bin:
[usb] pm3 --> smart upgrade -f /usr/local/share/proxmark3/firmware/sim014.bin
[=] --------------------------------------------------------------------
[!] ⚠️ WARNING - sim module firmware upgrade
[!] ⚠️ A dangerous command, do wrong and you could brick the sim module
[=] --------------------------------------------------------------------
[=] firmware file /usr/local/share/proxmark3/firmware/sim014.bin
[=] Checking integrity /usr/local/share/proxmark3/firmware/sim014.sha512.txt
[+] loaded 3658 bytes from binary file `/usr/local/share/proxmark3/firmware/sim014.bin`
[+] loaded 158 bytes from binary file `/usr/local/share/proxmark3/firmware/sim014.sha512.txt`
[=] Don't turn off your PM3!
[+] Sim module firmware uploading to PM3...
? 3658 bytes sent
[+] Sim module firmware updating...
[#] FW 0000
[#] Writing failed
[-] ⛔ Sim module firmware upgrade failed
[usb] pm3 --> I am stuck right now. Anybody any idea how to solve the writing or and the mismatch problem? Thanks for some hints...
Offline
#2 2024-02-14 14:42:56
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,507
- Website
Re: Sim014.bin upgrade problem
.... do you have a Proxmark3 RDV4?
Offline
#3 2024-02-15 08:40:50
- TomNick100
- Contributor
- Registered: 2024-02-07
- Posts: 4
Re: Sim014.bin upgrade problem
.... do you have a Proxmark3 RDV4?
No, Easy
Offline
#4 2024-02-15 09:14:18
- iceman
- Administrator
- Registered: 2013-04-25
- Posts: 9,507
- Website
Re: Sim014.bin upgrade problem
Does your Easy have extra external flash memory? And you need to flash / run a client targeted to your specific device.
Offline