Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
I am trying to simulate an em4x50 Tag and i dont know if it works properly. Client output looks good. I have noticed the red LED C lights up when coming close to the reader, the other LEDs do not light up. Does this indiacte anything?
When Simulating em410x tags, the red LED A also lights up from the beginning and everything works fine.
I have been looking for Documentation about the LDEs but did not find any. Is there documentation about the LEDs?
I am working with a Proxmark 3 RDV4
Offline
Good evening, have you tried a standalone mod?
ex: LF_THAREXDE | LF EM4x50 simulator/read standalone mode - tharexde, otherwise your antenna & of course Q 14 for the em 4x50 tag?
Good evening.
Otherwise yes I had already seen this manipulation with the button & the "abcd" LEDs however I am no longer sorry.
Offline