Research, development and trades concerning the powerful Proxmark3 device.
Remember; sharing is caring. Bring something back to the community.
"Learn the tools of the trade the hard way." +Fravia
You are not logged in.
Time changes and with it the technology
Proxmark3 @ discord
Users of this forum, please be aware that information stored on this site is not private.
Pages: 1
I couldn't simulate a 213 tag correctly. I dumped ( hf mfu dump) and the .bin looks good. I run the simulation, and trying to read it with a second proxmark I get some errors. with the command "hf mfu info" I get this error:
[=] --- Tag Counter
[=] [02]: 00 00 00
[+] - 00 tearing ( fail )
[!!] ? Error: tag didn't answer to READ SIGNATURE
And when doing a dump I could see that the MFU dump file information is zero:
[=] MFU dump file information
[=] -------------------------------------------------------------
[=] Version..... 00 04 04 02 01 00 0F 03
[=] TBD 0....... 00 00
[=] TBD 1....... 00
[=] Signature... 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[=] 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
[=] Counter 0... 00 00 00
[=] Tearing 0... 00
[=] Counter 1... 00 00 00
[=] Tearing 1... 00
[=] Counter 2... 00 00 00
[=] Tearing 2... 00
[=] Max data page... 43 ( 176 bytes )
[=] Header size..... 56 bytes
I try with proxmark3 rev1 and proxmark easy, and in both cases I get the same issues.
Has anyone had similar complications?
Thanks!!
Offline
Pages: 1