Proxmark3 community

sampurna

Contributor

Registered: 2022-02-19

Posts: 16

How can i get a 26 bit out put during lf simulation .

Hi

I was trying to emulate  some data in proxmark3  by passing raw data through below command .

"lf hid sim -r 1234"  as a result i am getting a big number as the output which is  "00000000004660"

Can you please let me know how can i control the length of the output to 26 bit rather than such a big number .

I would like to use the above command is it possible , please let me know .

Regards
Sampurna

quterydyf

Contributor

Registered: 2023-02-15

Posts: 16

Re: How can i get a 26 bit out put during lf simulation .

1234 in hex = 4660 in decimal.
Type you wanted big number into any dec2hex converter and pass the result to the "lf hid sim -r _______". It will be no more than 7 digits.