Proxmark3 community

Research, development and trades concerning the powerful Proxmark3 device.

Remember; sharing is caring. Bring something back to the community.


"Learn the tools of the trade the hard way." +Fravia

You are not logged in.

Announcement

Time changes and with it the technology
Proxmark3 @ discord

Users of this forum, please be aware that information stored on this site is not private.

#1 2023-02-14 23:46:58

eyekeeper
Contributor
Registered: 2023-02-13
Posts: 3

Support for LF i57,i57v2,H5,H5.5,H7 keyfobs

Hi, there are RW 125kHz keyfobs with intercom filter bypass ability, known also as i57, i57v2, H5, H5.5, H7. None of them isn't directly supported by proxmark3 software. Read command identifies them as valid EM 410x tags, but t55xx commands are almost useless. Is there any info on how to deal with that stuff?

Offline

Board footer

Powered by FluxBB