• Registered: 2009-02-10
  • Posts: 6

Topic: Proxmark3 sales

Hello everyone,

I'm currently selling assembled & fully functional proxmarks for $400 a piece. If anyone is interested in getting one, let me know.

Also, if enough people would be interested in getting a proxmark, we could order a larger shippment from the factory and drive the per-unit price down quite a bit (to cca. ~$300).

Cheers, marauder

  • roel
  • Administrator
  • Offline
  • Registered: 2008-05-21
  • Posts: 239

Re: Proxmark3 sales

Do you have a webshop or link where people can find more information about ordering and shipment?
If you can set this up I can add you to the supplier list on the main website.

  • Registered: 2009-02-10
  • Posts: 6

Re: Proxmark3 sales

Hey Roel,

I'm still working on the site. It will be online soon. I was planing on contacting you once it was complete (to be added on the supplier list).

Regarding shipping options, I can ship it via FedEx (cca. $70), or via standard post (cca. $10). If standard post is used, the delivery time would be a bit longer (usually cca. 3 weeks).

Cheers, Marauder

  • From: Warsaw,Poland
  • Registered: 2009-07-05
  • Posts: 26

Re: Proxmark3 sales

Hello,

I am interesting in buying assembled and tested device. Price from proxmark3.com is too expensive to me.
I can pay by PayPal.

Regards,

--
SzYmOn
  • Registered: 2009-02-10
  • Posts: 6

Re: Proxmark3 sales

Sorry,

all of the units are gone. I'll let everyone know once the next batch is in.

  • From: Warsaw,Poland
  • Registered: 2009-07-05
  • Posts: 26

Re: Proxmark3 sales

marauder,

txh 4 info. I hope it will be soon. I sent info to some company here in Warsaw to produce PCB - I am interesting how much it is smile))

Is there list of all chips/parts needed to assembly with PCB? I read all forum and I was not able to find it out. I just got PCB schema from http://www.proxmark.org/files/index.php … tchpcb.zip files section.

Regards,

--
SzYmOn
  • Registered: 2009-08-24
  • Posts: 1

Re: Proxmark3 sales

Hi marauder

I also am interested in obtaining one, expect to have news.
Regards from Argentina - South America

Esteban

  • Registered: 2009-09-17
  • Posts: 20

Re: Proxmark3 sales

marauder your offer is valid today?
esteban have you received some response from marauder?
I think the best solution is to buy a proxmark3 from proxycat, also if it's more expensive. Now the price is 449$.

Last edited by jonor (2009-09-17 22:12:25)

  • From: Warsaw,Poland
  • Registered: 2009-07-05
  • Posts: 26

Re: Proxmark3 sales

Hello,

any cheaper boards than $449 ???
I am still interesting in smile

Last edited by szymonunion (2009-09-17 23:14:05)

Regards,

--
SzYmOn
  • spble
  • New member
  • Offline
  • Registered: 2009-09-22
  • Posts: 1

Re: Proxmark3 sales

I would also like to register my interest in buying one or two if anyone's getting some made.
I'd rather not pay the $450 either.

spble - Australia.

  • Registered: 2008-08-19
  • Posts: 286

Re: Proxmark3 sales

spble,

If you want I can sell you my PM3 fully assembled and working. It has a color LCD and functional HF/LF antennas fitted already as seen below:
http://farm4.static.flickr.com/3308/3197328181_81cef893a1.jpg

The full details of the antennas and LCD are in the other flickr photos if you care to look, so basically plug it in and you're ready to hack with it.

I can sell it to you basically at cost (for AUD$250 equiv to < USD$220) as I could use the money to offset what I've already spent to develop my next version PM3 (as seen in the latest flickr photos). If you're keen PM me or email me at hotmail. I'm in NZ, so shipping is included in that price, can paypal me.

If you want it but don't like the LCD/antennas I can remove them for you or you can do it later, don't even need to desolder them, just carefully cut out the wires which are hair thin and peel off the foam spacer and you have a bare PM3 board.

Last edited by d18c7db (2009-09-24 09:40:26)

  • John
  • Member
  • Offline
  • From: Wales
  • Registered: 2009-08-21
  • Posts: 55

Re: Proxmark3 sales

Wow that's cool >_<

What can you do with the screen? tongue

  • Registered: 2008-08-19
  • Posts: 286

Re: Proxmark3 sales

Display stuff. Anything you want really. There is some code already there that lets you put text on it. Comes in handy in standalone mode but since this is pretty much a one off no additional code was added to the source tree for the LCD

  • Registered: 2009-09-17
  • Posts: 20

Re: Proxmark3 sales

Which is the function of LCD? Which information can I read on it?
d18c7db your offer is valid also for me? Ship in Italy.

  • Registered: 2008-08-19
  • Posts: 286

Re: Proxmark3 sales

Sorry guys, no longer available. Thanks for asking.

  • Registered: 2009-09-17
  • Posts: 20

Re: Proxmark3 sales

Ok I await some other sell a chiper proxmark3.
The shop of proxcat is good but is too expensive.
I read this thread http://www.proxmark.org/forum/topic/260 … z-antenna/ a simple antenna for 125 KHz, proxcat sell to 19USD on the web the cost is 4 USD.

  • From: Warsaw,Poland
  • Registered: 2009-07-05
  • Posts: 26

Re: Proxmark3 sales

Hello,

I would like buy one, but not too expensive... I am sure there are some of us which want to buy Proxmark3 too.

Last edited by szymonunion (2009-10-02 20:43:05)

Regards,

--
SzYmOn