The new clone doesn't work correctly though, the clone will open my front door but wont control my elevator.
This is usually the case that door is hf mf 1k, which you cloned correctly.
The elevators are lf hid, so you need to clone the lf 125k part of the fob, too!
Run an lf sea on your key?
]]>No, I dont have a Gen 2 card. Need to look around a purchase some new cards
If you can wait a few weeks, you can get small quantities of Gen2 cards for $1 or less from China. Search Aliexpress for 'CUID' (the Chinese to English translation for Gen2).
I've tried many different Gen1a cards from China through Aliexpress. With Gen1a cards I found some (not all) reply with a different SAK from the written SAK but it never made any difference to the TDi readers on my apartment block. My TDi readers seem to ignore SAK.
It's possible your reader employs countermeasures against Gen1 and/or Gen1a. I found a mixture of TDi reader firmwares on my apartment complex; most work with Gen1a cards but some send a Magic wipe command (which the 'a' of Gen1a is immune too because it ignores the wipe command), some readers send the first part of a magic command and halt if a response is received (Gen1a is not immune to this, it fails).
]]>@Charlie : Is it resolved ? Did you try to use Gen 2 card?
No, I dont have a Gen 2 card. Need to look around a purchase some new cards
]]>And it's not unusual, that one terminal let you in and another doesn't work with the same card: depends on which sectors the terminals are reading from and which keys they use for authentication (can diff)
]]>Answers to magic commands (GEN 1a): YES <- thats gen1 magic card, try undetectable magic card
]]>The following sectors were different
Sec 5 Block 20
Sec 7 Block 30
Sec 9 Block 36
Sec 10 Block 40,41,42
Any reason these blocks would be different when make a duplicate?
I tried on a different fob and had issues with the 2 blocks being different on that one too. None of the blocks that were incorrect on either fob were the same
]]>If all the card data is exactly the same then it must be the only option left.
Any ideas why the 2 SAK appear different when i do a "hf search u" but when i look at sec 0 on both they are the same?
]]>What are the contents of the rest of the 15 sectors?
Are they exactly the same?Maybe the reader is checking for magic cards. Could you try a once changeable Mifare card (uid can be changed once)?
I was wondering about that but thought it would be wierd for one reader(front door) to accept it and not another reader(elevator), which is why i thought the copying of the sectors must be the issue
]]>Sec 5 Block 20
Sec 7 Block 30
Sec 9 Block 36
Sec 10 Block 40,41,42