hf legic decode
hf legic reader
hf legic save
hf legic load
hf legic sim
There have been much adaptations on both offical and iceman firmware ...
]]>client/cmdhfmf.c
Change line 2146 from "char buf[33] = {0x00}; // 32+1 null terminator" to "char buf[256] = {0x00};"
tested and confirmed working.
]]>Getting the same error as blackpaanda and more on the iceman fork however the original git is still working as intended.
Iceman fork:
pm3 --> hf mf cload D3A2859F
File content error. Block data must include 32 HEX symbols
pm3 --> hf mf cload D3A2859F
#db# wupC1 error
Can't set magic card block: 0
pm3 --> hf mf cload D3A2859F
Command execute timeout
Can't set magic card block: 0
pm3 --> hf mf cload D3A2859F
#db# wupC1 error
Can't set magic card block: 0
pm3 --> hf mf cload D3A2859F
File content error. Block data must include 32 HEX symbols
Original git output:
proxmark3> hf mf cload D3A2859F
Chinese magic backdoor commands (GEN 1a) detected
Loading magic mifare 1K
Loaded from file: D3A2859F.eml
For hf mf csetuid, I had to enter the command a couple times for it to work.. either my antenna is crap or something else is wrong.
pm3 --> hf mf csetuid 01020304
--wipe card:NO uid:01 02 03 04
Command execute timeout
Couldn't get old data. Will write over the last bytes of Block 0.
new block 0: 01 02 03 04 04 00 00 00 00 00 00 00 00 00 00 00
UART:: write time-out
Sending bytes to proxmark failed
#db# wupC1 error
Can't set UID. error=2
pm3 --> hf mf csetuid 01020304
--wipe card:NO uid:01 02 03 04
old block 0: D3 A2 85 9F 6B 88 04 00 C8 01 00 20 00 00 00 16
new block 0: 01 02 03 04 04 88 04 00 C8 01 00 20 00 00 00 16
old UID:00 00 00 00
new UID:01 02 03 04
pm3 --> hf search
UID : 01 02 03 04
ATQA : 00 04
SAK : 08 [2]
TYPE : NXP MIFARE CLASSIC 1k | Plus 2k SL1 | 1k Ev1
proprietary non iso14443-4 card found, RATS not supported
Answers to magic commands (GEN 1a): YES
Prng detection: WEAK
Valid ISO14443-A Tag Found - Quiting Search
Also just ran the formatMifare lua script and that is now confirmed working. I had to uncomment the "core.console(cmd)" first.
- script run formatMifare -k <old_key> -n <new_key> -a FF0780
Are you sure about hf mf cload ? I pushed a fix today and @blackpaanda still gets an error..
]]>iClass:
- hf iclass managekeys n 0 k <key>
- hf iclass managekeys p
- hf iclass dump k <key>
- hf iclass readblk b <block> k <key>
- hf iclass writeblk b <block> d <data> k <key>
- hf iclass eload f <file>
Indala:
- lf indala demod <value>
- lf indala clone <value>
Mifare:
- hf mf chk *1 ? d <keys_dic>
- hf mf chk *1 ? t
- hf mf hardnested 0 A <key> 4 A w
- hf mf dump
- hf mf restore
- hf mf rdsc <sector> A <key>
- hf mf rdbl <block> A <key>
- hf mf wrbl <block> A <key> <data>
- hf mf cgetsc <sector>
- hf mf cgetbl <block>
- hf mf csave u 1
- hf mf csave 1 i test
- hf mf decrypt <nt> <ar_enc> <at_enc> <data>
- hf mf nested <card mem> <blockno> <key A/B> d
HID:
- lf hid read
- lf hid demod
- lf hid wiegand 0 <fc> <cn>
- lf hid clone <id>
- lf hid sim <id>
T55xx:
- lf t55xx wr b <block> d <data>
- lf t55xx detect
- lf t55xx config
- lf t55xx wipe
Data:
- data load <file>
- data save <file>
- data rawdemod p1 32 1
- data printdemod x o 1-4
- data samples <size>
Scripts:
- script run dumptoemul.lua
- script run remagic.lua
Analyse:
- analyse hid r <key>
I have access to Indala & iClass multiclass Readers including the long range R90, ASR-620, & Maxiprox if you need anything specifically run.
]]>I need a complete testing of all functionality in iceman fork OR proxmark offical release.
Just take the latest source from GitHub, and test it all out. Report back as GitHub issues when there is compilation errors, run-time errors, bugs in expected behavior. Look at the current issues to understand which problems already is known.
]]>