The output of the v2.0.0:
====================================================
proxmark3> hw ver
Prox/RFID mark3 RFID instrument
bootrom: HEAD/v2.2.0-suspect 2017-04-21 05:04:09
os: HEAD/v2.2.0-suspect 2017-04-21 05:04:09
LF FPGA image built for 2s30vq100 on 2015/03/06 at 07:38:04
HF FPGA image built for 2s30vq100 on 2015/06/22 at 21:47:54
uC: AT91SAM7S512 Rev B
Embedded Processor: ARM7TDMI
Nonvolatile Program Memory Size: 512K bytes. Used: 160828 bytes (31%). Free: 363460 bytes (69%).
Second Nonvolatile Program Memory Size: None
Internal SRAM Size: 64K bytes
Architecture Identifier: AT91SAM7Sxx Series
Nonvolatile Program Memory Type: Embedded Flash Memory
it appears if you checkout the v2.00 release (flash bootrom then arm) it should work on 15693 tags.
]]>Antenna voltage:
====================================================
proxmark3> hw tune
Measuring antenna characteristics, please wait...#db# DownloadFPGA(len: 42096)
......
# LF antenna: 43.86 V @ 125.00 kHz
# LF antenna: 20.49 V @ 134.00 kHz
# LF optimal: 44.14 V @ 123.71 kHz
# HF antenna: 31.12 V @ 13.56 MHz
Displaying LF tuning graph. Divisor 89 is 134khz, 95 is 125khz.
Command tried (partially):
====================================================
proxmark3> hf search
no known/supported 13.56 MHz tags found
proxmark3> hf 15 dumpmemory
No Tag found.
proxmark3> hf 15 cmd read -2 *
No Tag found
no answer
====================================================
hope that is sufficient for you to diagnose my problem.
My next approach will be to upgrade the firmware and try again.
thanks
]]>which pm3 do you have?
which firmware do you have install? (hw version)
which antenna voltages do you get? (hw tune)
which hf 15 commands did you use?
and as always, try distance and positioning over antenna to find sweetspot
]]>