I have a feeling that the bits at the first ?? in front of bitlen is just a start of data marker.
Could the unknown bits not be a checksum but instead parity bits?
I know this is an old post but I could not find any conclusion on the topic. Did you able to clone the Securakey cards?
I've not been able to. Would be nice if someone is able to get through them as they seem to be OEM for several other tags for other companies (Doorking comes to mind).
]]>this topic is on Securakey tags
]]>Hold the button on the side if it doesn't detect.
Try another port if still doesn't work.
I already tried both of those to no avail. How long should I expect it to take to flash? I held the button for close to 10 minutes.
]]>Try another port if still doesn't work.
]]> ====================================
FLASHING bootrom.elf, please wait...
====================================
Loading ELF file '..\firmware_win\bootrom\bootrom.elf'...
Loading usable ELF segments:
0: V 0x00100000 P 0x00100000 (0x00000200->0x00000200) [R X] @0x94
1: V 0x00200000 P 0x00100200 (0x00000cc0->0x00000cc0) [RWX] @0x298
Waiting for Proxmark to appear on com5..........................................
.....
I also get this error when I try to run fullimage.bat. I'm positive that my PM3 is now set to COM5.
]]>...wiki, forum threads, compiling.txt, readme.md you name it.
After I attempted to flash it, I've ended up with this error.
Qt: Untested Windows version 6.2 detected!
ERROR: invalid serial port
What should I do?
]]>I noticed it when I saw the threadstart
You will need to pull the latest source from GitHub, compile & flash to enjoy @marshmellows additions.
Ok, is there a guide to do this? I'd like to make sure that I'm doing it correctly
]]>You will need to pull the latest source from GitHub, compile & flash to enjoy @marshmellows additions.
]]>