2.4Ghz RFID antenna and commands
]]>An "until-terminated" long time search flag
lf search F (F is for FOREVER, or at least until someone halts it with ctrl+C/ctrl+D/pressing pm3 button)
The "hf search" wish listed above.
A combined "search" command that cycles through lf search and hf search.
The FOREVER flag on a combined "search" command would be so useful.
For example:
pm3 > sea F
And now my proxmark3 just searches and searches, sometimes finding valid cards and never stopping until I tell it to.
]]>the girogo card was fine too, i believe it is the same like above, but not sure. i can provide sample-datasets if needed.
]]>I was curious that just by using send command., can we perform below communication?
R: 26 => Welcome (REQA) (or use WUPA = 0x52)
T: 44 03 => Respond (ATQA)
R: 93 20 => Select cascade 1 (SEL)
T: 88 04 34 74 cc => CT, UID(byte 1,2,3), BCC
R: 93 70 88 04 34 74 cc 0e 05 => Select available tag (SEL)
T: 24 d8 36 => Select Acknowledge (SAK)
R: 95 20 => Select cascade 2 (SEL)
T: e1 e3 1c 80 9e => UID(byte 4,5,6,7), BCC
R: 95 70 e1 e3 1c 80 9e b9 e1 => Finish select (SEL)
T: 20 fc 70 => SAK without cascade bit set
R: e0 50 bc a5 => Request Answer to Select (RATS)
T: 06 75 77 81 02 80 => ATS (DESFire EV1)
R: 50 00 57 cd => Disable (HALT)
If not, It would be great to see that in proxmark3 by just having simple command to send above communication.
Regards,
Jk123
Time stamping in proxmark log file... It is a pain searching for past records..
I told you they have it on already :X
]]>