Can I get committer access to make improvements? Also, is there any plan to integrate the improvements midnitesnake made into the wikis?
]]>Here are the draft versions of the Gentoo & OSX User Guides:
OSX (MacPorts) https://docs.google.com/document/d/1C5ebg_tlmyzu7K-n1THDOJMkHSKaY7LS24AKYjimmxo/pub
Gentoo https://docs.google.com/document/d/1owRX7lcqonnFJ3fXiIFfsmqtIT44bmSp4AJo4wTmcUQ/pub
I'm working on the Mac documentation. My board was fried, so had to deal with that. Now that I have a working board again, I'll be spending some time on it.
Glad to hear that your PM3 is up and running again!
Ok, Ive used the Ubuntu Guide as a template (just the text), and changed the instructions to the ones I have performed on Gentoo (same sequence of steps should work on the Pentoo LiveCD, or any other Gentoo based system).
I even tried to cover different steps (depending on HID/CDC device) on compiling/updating the software.
Up for peer review. What is the best method to get this across to you? Some formatting will need to be re-applied.
Great! It's entirely up to you how you plan to share it. At this stage I'd suggest Google docs as it seems to be that simplest method.
]]>I even tried to cover different steps (depending on HID/CDC device) on compiling/updating the software.
Up for peer review. What is the best method to get this across to you? Some formatting will need to be re-applied.
]]>Providing Gentoo and Mac documentation. We don't have anything on these platforms yet.
If you want, you can provide me with the detail and I can format it to match the existing documentation.
Post here if you see anything wrong with the existing documentation.
There's quite a bit of work to do!
One of the biggest problems with the PM3 is the lack of accurate documentation. The answers are in the forum but it usually takes more time than anyone would like to spend.
Win 7
Gentoo Linux
Ubuntu Linux
Mac OSX 10.8+ (Mountain Lion)
If you want any help, I'm available.
]]>Ok, I wasn't sure whether you were using some automated process to convert marked up text files into PDF. I can certainly work with word files and create the PDFs. Although - since that is the way you're doing it, maybe Pages for the Mac version and then just quick export to PDF. Not a big deal either way.
If/When I update the documentation again (hopefully soon) I have every intention of updating the documentation to ODF. I'll also add it to the repository.
I have uploaded everything to code.google.com
Do I need permissions to commit?
You will need permissions to commit. Please contact Roel for this.
]]>robertpalmerjr wrote:I'm currently stuck at updating my older r486 board to the latest firmware. I was hoping to write a nice tutorial on that, but it looks like I may have to fall back to using the JTAG programmer to update to the latest firmware rather than the bootloader. Although I guess I could use the JTAG and reload the r486 and then try the "normal" process again. Either way, I'll have a decent step by step.
No worries. The process is easy enough but for newcomers this can be a little scary.
Yes, confusing for newbies, in my case, it appears that somehow the boatload blocks have been write protected so the bootloader fails when it tries to overwrite them. Not sure how I got into this state, but it's definitely not a normal situation.
robertpalmerjr wrote:As for how, I can write, edit and post to the wiki. How are you creating the PDFs, I can at least write the content, if not provide the source files also.
I... I wrote the original documents in MS Word. I have no excuse for this, it was dumb. I'll post a link to the original files shortly.
I create PDFs using Adobe PDF creator or MS Word. There are alternatives of course.
Ok, I wasn't sure whether you were using some automated process to convert marked up text files into PDF. I can certainly work with word files and create the PDFs. Although - since that is the way you're doing it, maybe Pages for the Mac version and then just quick export to PDF. Not a big deal either way.
robertpalmerjr wrote:How do I get access to the wiki to make the updates?
What I do is check out everything...
svn checkout https://proxmark3.googlecode.com/svn proxmark3 --username 0xFFFF
...then I make my changes to /wiki/ and commit as required.
Do I need permissions to commit?
]]>Sorry for the delay, no problem on your belated response, we all have other things going on.
We certainly do!
I'm currently stuck at updating my older r486 board to the latest firmware. I was hoping to write a nice tutorial on that, but it looks like I may have to fall back to using the JTAG programmer to update to the latest firmware rather than the bootloader. Although I guess I could use the JTAG and reload the r486 and then try the "normal" process again. Either way, I'll have a decent step by step.
No worries. The process is easy enough but for newcomers this can be a little scary.
As for how, I can write, edit and post to the wiki. How are you creating the PDFs, I can at least write the content, if not provide the source files also.
I... I wrote the original documents in MS Word. I have no excuse for this, it was dumb. I'll post a link to the original files shortly.
I create PDFs using Adobe PDF creator or MS Word. There are alternatives of course.
How do I get access to the wiki to make the updates?
What I do is check out everything...
svn checkout https://proxmark3.googlecode.com/svn proxmark3 --username 0xFFFF
...then I make my changes to /wiki/ and commit as required.
Sorry for the delay, no problem on your belated response, we all have other things going on.
I'm currently stuck at updating my older r486 board to the latest firmware. I was hoping to write a nice tutorial on that, but it looks like I may have to fall back to using the JTAG programmer to update to the latest firmware rather than the bootloader. Although I guess I could use the JTAG and reload the r486 and then try the "normal" process again. Either way, I'll have a decent step by step.
As for how, I can write, edit and post to the wiki. How are you creating the PDFs, I can at least write the content, if not provide the source files also.
How do I get access to the wiki to make the updates?
]]>