Cheers!
]]>Best Regards
AtharWulf
Philippe did an replacement upgrade of the chip on one of his Pm3 Easy. You should be able too if you are into soldering
You can make a 256kb fitting fw by adapting the Makefiles in RRG/Iceman repo.
If someone haa a hint where is a good post that explains how to get reproducible sniffs that would be helpful.
]]>I experience a problem when connecting two DL533N Reader/Writer to my virtual machine.
When I run the tool nfc-relay from the examples provided by libnfc, the program stops working after printing the following output:
niklas@niklas-ubuntu-virtualbox:~$ nfc-relay
nfc-relay uses libnfc 1.7.1
Hint: tag <---> initiator (relay) <---> target (relay) <---> original reader
NFC emulator device: NXP / PN533 opened
[+] Try to break out the auto-emulation, this requires a second reader!
[+] To do this, please send any command after the anti-collision
[+] For example, send a RATS command or use the "nfc-anticol" tool
In addition to that, pn53x-diagnose detects the following error:
niklas@niklas-ubuntu-virtualbox:~$ pn53x-diagnose
pn53x-diagnose uses libnfc 1.7.1
NFC device [NXP / PN533] opened.
Communication line test: OK
ROM test: OK
RAM test: OK
NFC device [NXP / PN533] opened.
error libnfc.driver.pn53x_usb Unable to receive data: buffer too small. (szDataLen: 1, len: 8)
pn53x_transceive: cannot diagnose communication line: Input / Output Error
ROM test: OK
RAM test: OK
Does anyone know the reason behind this problem and a possible workaround for it?
Thank you!
]]>